Dechlorination analyzer

Electro-Chemical Devices’ (ECD) DC80 De-Chlorination Analyzer utilizing a “zeroshift” method ensures stable and reliable chlorine measurement and protects total chlorine sensors from damage while monitoring near zero, total chlorine amounts.

Mar 18th, 2015
3804113_article.jpg
3804113_article.jpg

Electro-Chemical Devices’ (ECD) DC80 De-Chlorination Analyzer utilizing a “zeroshift” method ensures stable and reliable chlorine measurement and protects total chlorine sensors from damage while monitoring near zero, total chlorine amounts. Chlorine is metered into the sample, shifting the zero from a near zero chlorine concentration to a measurable value. The analyzer monitors chlorine in drinking water, wastewater, cooling water and other applications from 0.05 to 20 ppm. It features built-in automatic pH compensation for samples between 4 and 12 pH.

Click for Electro-Chemical Devices’ (ECD)

More in Technology Guide
Dzmitrock87/iStock
Q&A: Using ground fault pulse detection to identify a failing motor
Eaton’s Steve Zbytowski talks about new technology that can detect, locate and send information to maintenance personnel to minimize repair time.
Jan 14th, 2019
UVC LEDs simplify water quality monitoring.
Q&A: How can the industry simplify water quality monitoring?
On April 27 during our live webinar, water quality experts from Crystal IS will help explain how UVC LEDs can improve and simplify water monitoring …
Apr 20th, 2017
Our team was excited to talk with Delta Group and see its new variable frequency drive for harsh conditions, including cleaning in place.
Operations in the oil patch
Equipment dedicated to and designed for oil and gas applications is often required in this unforgiving industry.
Apr 13th, 2017
The protective covering of these water lines helps prevent abrasion to the hose underneath. All images courtesy of Motion Industries
Understanding industrial hoses for oil & gas operations
Considerations for maintaining uptime in drilling and completion processes
Mar 19th, 2017
Editor in Chief Lori Ditoro (L) and Xylem’s Kyle DelPiano (R) at the 2017 AHR Expo
Podcast: Energy & equipment challenges in HVAC & DOE regulations
Xylem’s market development manager explains the effect of upcoming DOE motor and pump regulations on the process industries, the new U.S. administration’s potential changes, and more.
Feb 21st, 2017
Throughput at a coal preparation plant may average 4,000 tons per hour. All images courtesy of BJM Corporation
Ending solids buildup
A coal preparation plant turns to a top-discharge pump to solve floor cleanup sump problems.
Feb 4th, 2017
UVC LED-based sensors may enhance on-line, real-time measurement needs with low-power-consumption, monochromatic, solid-state solutions. Image courtesy of Crystal IS
Simplified water quality assurance with UVC LED-based sensors
The UVC LED-based sensors – which use UV photometry to identify water contaminants in real time – collect water quality data continuously at multiple locations throughout a plant’s incoming and outgoing water network.
Feb 1st, 2017
Discussions at the 2016 AHR Expo | All photos courtesy of AHR Expo
Latest trends in HVACR: AHR Expo 2017 preview
Innovations being unveiled at AHR, Jan. 30 to Feb. 1 in Las Vegas, echo major trends driven by the growing construction market in North America and the world.
Jan 10th, 2017
End of continuous casting process for steel showing the solid steel being cooled by water | Image courtesy of Greenshoots Communications/Alamy
Keeping pace with progress
A submersible slurry pump with an auger enables a steel plant to achieve higher production rates.
Nov 11th, 2016
Figure 1. Typical RO spiral wound element. All graphics courtesy of LANXESS
Improvements in feed spacer geometry reduce operational costs
A feed spacer, or netting, acts as a layer in reverse osmosis and provides vital separation between the membrane surfaces.
May 25th, 2016
All graphics courtesy of GE Water & Process Technologies
Monitoring helps wastewater plant achieve clean optimization
A Canadian wastewater plant reduces maintenance frequency with a monitoring consulting service.
Apr 1st, 2016
WQA16RyannWatts, UV Treatment
Watts’ UV treatment explained at WQA 2016
Ryan with Watts demonstrates three models of the product in this video.
Mar 21st, 2016
Phil Boyd, chief building engineer of Martin Selig Real Estate (left), talks with Corey Rasmussen, Grundfos Northwest service sales manager. All graphics courtesy of Grundfos.
Boosting pressure, saving energy
A new water boosting system procures utility savings for a Seattle office building.
Feb 1st, 2016
BartCo/iStock
Ask Dan, the Wastewater Wizard: Let’s concentrate on the concentrate
Two things are important when working with concentrate: understanding its chemistry and capturing, storing and handling it separately from the general waste stream in almost all cases.
Feb 1st, 2016