Loop-powered display

April 15, 2015

Automation Products Group Inc. (APG) introduces a new display product, the “LPD” or Loop-Powered Display, ideal for installations that use loop-powered wiring.

Automation Products Group Inc. (APG) introduces a new display product, the "LPD" or Loop-Powered Display, ideal for installations that use loop-powered wiring.  The LPD displays are designed to be inserted into a 4-20 mA loop-powered sensor system to provide a local display without additional wiring. Setup is easy using just three buttons on the display. It can be used in places where explosive gases might be present such as oil fields, chemical yards, refineries, wastewater treatment plants or pumping stations. A secondary purpose is to convert analog signals to a digital Modbus signal for incorporating with modern communication protocols.

Click for APG

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.