The DEPOLOX® 700 M analyzer is designed for measurement and limited control tasks in the drinking and process water industry. The analyzer can incorporate up to six well-proven measurement parameters: free chlorine, total chlorine, pH, oxidation reduction potential, conductivity and temperature. The device uses a 7” color touch panel for an intuitive user interface and an LED lit flow cell that can be programmed to change color in case of an alarm condition.
Wallace and Tiernan, an Evoqua Company
Zoeller Engineered Products’ solids handling line fits the industry’s need for higher horsepower pumps. The 4” models will provide a moderate flow when pumping against a high head while the 6” pump is ideal for a high flow requirement where a low head exists. The new 64 HD series pumps provide long service life with minimal downtime. The motor is optimally designed with oil-filled housings and non-overloading windings, which enable it to maintain a low operating temperature when facing the harshest of conditions.
Monitor chemical usage
The Carboy-Scale™ from Force Flow allows operators to accurately monitor how much chemical is being used in their treatment process. The scale platform is 100% PVC plastic, making it immune to corrosion. The SOLO G2® digital weight indicator displays the remaining chemical in increments as small as 1/10 lb. Three platform sizes are available to accommodate drums from 5 to 55 gallons.
The Victaulic high-density polyethylene (HDPE) pipe-joining system provides a full line of Installation-Ready™ and grooved solutions from 2” to 36”. The Style 905 Refuse-to-Fuse™ HDPE coupling joins plain-end HDPE pipe 2-8” in diameter. The installation-ready coupling contains stainless-steel restraint rings that bite into the outside diameter as the coupling housing segments are tightened. With no need for disassembly, the assembly process is quick and requires no loose parts. The coupling is also visually inspectable, allowing installers to see a bolt-pad-to-bolt-pad confirmation that the joint is properly assembled.
Liquid level measurement
VEGAPULS 64 accurately detects the liquid level, even in applications with high condensation. The antenna system is encapsulated in PTFE or PEEK, so there are no cavities or crevices in which product can accumulate. The surface of the material is very finely processed with diamond tools, which also considerably reduces product adhesion. In addition, special software algorithms filter out interference caused by buildup on the antenna system. Thanks to the high dynamic range of the sensor, signal attenuation caused by product deposits is largely compensated. This allows the level to be reliably detected even with contamination on the sensor.
Total treatment solutions
Kusters Water’s Zi-Biox® product line offers numerous solutions for a compact, cost-efficient, customizable, complete front-to-back water treatment system including: Membrane Bioreactor (MBR), Moving Bed Bioreactor (MBBR) and Packaged Treatment Plant Solutions (TPS). Applications include: brewery, canning, cheese production, chemical processing, distillery and more.
Industrial turbine generator
ClearPower North America has expanded the market for its patented, Straflo design Industrial Turbine Generator (ITG) with the launch of its new ITG-M Series for the mining industry. The ITG-M Series allows mining companies to utilize their existing gravity-fed pipelines or outfalls to convert water and selective water slurry flows into a source of sustainable, renewable, low-cost electricity. By harnessing sufficient water flow and head, mining companies that install the ITG-M Series can produce over 30 MW of economical off-grid power, significantly reducing their electricity costs. The ITG-M is capable of producing up to three megawatts of electricity per 150 feet of head.
ClearPower North America
The Greyline DFM 5.1 is designed for “difficult liquids” that would damage regular flow meters such as wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop because the device measures flow from outside a pipe. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2” (12.5 mm) inside diameter or larger. The electronics/display enclosure can be mounted nearby. The DFM 5.1 includes a new digital signal processor to filter background noise and interference, and to measure flow rates accurately in liquids containing gas bubbles or solids particles.
Service-in-place progressive cavity pump
NETZSCH Pumps North America has added to its line of FSIP (full service-in-place) NEMO® progressive cavity pumps. Ideal for wear-intensive applications, the FSIP™ design has been re-engineered to provide full access to all the pumps’ rotating parts. Users can open the in-service pump housing, dismantle all rotating parts, and install them again without having to remove the pump from the pipe assembly or having to disconnect wiring. The NEMO’s rotor-stator unit can be lifted out after opening the newly designed inspection cover on the pump housing without the need for any special tools.
NETZSCH Pumps & Systems
Slurry cartridge single seal
Chesterton introduces the 170L Slurry Cartridge Single Seal for heavy duty applications. Engineered to operate reliably in severe slurry environments without external seal flushes in most applications, the seal can help reduce water expenses, especially where clean water is scarce or costly to produce. The 170L is designed to fit Warman® AH® series pumps without pump modification. A single clamping screw prevents equipment shaft damage and simplifies seal removal in sticky or viscous fluids, or where solids have a tendency to clog up standard set screw designs.
A.W. Chesterton Company
Multi-operation survey system
Straightpoint and Tarka-Systems B.V.’s Multi Operation Survey System (MOSS) can collect data from up to six different monitoring devices on a jobsite. Featuring six, 4-20 milliamp (mA) inputs that collect information when multiple types of data are required, captured by load cells, thermometers, anemometers and other technologies, it is typically applied where data needs to be gathered over a period of time. An IP67-rated, portable case, mounted on which are the connectors (also IP67 rated) that can be used while the case is closed, offers protection from the elements.
Asset performance management system
SUEZ announces upgrades and enhancements to its InSight™ Asset Performance Management System. Incorporating modern digital design trends and best practices, the latest InSight release offers users greater visibility and transparency into the operations they manage, whether at an enterprise, plant or even asset level. A new geomap feature and simplified navigations aim to make InSight easier to use, while expanded reporting and file management features enable sharing and analysis of key data points at all levels of an organization.
The new Series 5K DIN valve connector from Canfield Connector provides snug and secure pin contacts on solenoid spades. The 5K runs one wire rather two from the MCCR device to the control box, which reduces moisture intrusion in the box and saves on labor costs. It can be manufactured in a range of plastic housing materials for compatibility with high temperature and various chemical applications. In addition, the 5K has a rugged “straight-line” interface/cord configuration that is versatile for various applications including installation in many limited-space situations.
Portable isokinetic sampler
The ST5® is an automatic isokinetic stack sampler from Aqua Gas for identifying particulate matter and chemical pollutants including but not limited to fine dust, metals, VOCs, and HAPs. Can be used both for isokinetic and constant flow sampling. ST5® is available with or without the front-end sampling equipment as well as a replacement for existing sampling controllers. The ST5® automatically sets the correct isokinetic flow rate, measuring in real time the differential pressure and temperature in stack. It also evaluates flue gas velocity and flow rates. A liquid detector prevents the introduction of condensate in the sampling line.
The Q Exactive Focus mass spectrometer from Thermo Fisher Scientific combines quadrupole precursor selection with high-resolution, accurate mass detection to produce sensitivity that rivals triple quadrupole mass spectrometers and resolution that surpasses Q-TOF instruments. Q Exactive Focus offers a powerful, yet simple-to-use solution for food safety, environmental, and other screening applications. Features include: sensitive selectivity that eliminates interferences, allowing lower limits of detection and quantitation; fast polarity switching so more classes of compounds can be processed in a single analysis; and high scan speeds for compatibility with fast chromatography and high-throughput screening.
Thermo Fisher Scientific
Digital asset performance
Nalco Water, an Ecolab company, has introduced OMNI, a program that improves critical asset performance for power and chemical producers through a new digital platform and real-time process control technology. The OMNI program is designed to predict and prevent scale, corrosion and microbial factors that impact the performance of surface condensers and total heat exchangers. Precise data monitoring, asset simulation and expert water insights provide visibility to issues, giving Nalco Water and its customers the ability to identify incipient problems and execute solutions before those problems become shutdowns or other production losses.
KROHNE’s TIDALFLUX 2300 F is an electromagnetic flow meter that provides reliable flow measurement in pipes between 10 and 100% full. It features a non-contact sensor that is unaffected by oils and fats floating on the surface. Available in diameters to fit pipes up to 64 inches, TIDALFLUX 2300 F has high chemical and abrasion resistance. The electromagnetic flowmeter features an integrated, non-contact capacitive level measurement and an approval for ATEX zone 1 for use in hazardous environments. Applications include municipal or industrial wastewater transport application, and measurement of effluent brine from dredging, mining or sea/well water injection applications.
Air-driven power unit
Enerpac’s new, durable air-driven power unit technology is built for high-cycle industrial applications. The DuroTech™ Series features a durable dual ram pump with a steel reservoir and protective steel shroud. It requires no air lubrication, runs cool, and has reduced noise levels. Other features include four-station DO3 manifold with cover plates for unused stations; 8-gallon all metal reservoir with easy-access drain plug; and easy-to-read oil level sight glass.
Horizontal end suction pump
The Vertiflo 1400 Horizontal End Suction Pump is designed for process, pollution control, spray systems, deionized water, wastewater, corrosive liquids and chemicals. The heavy duty cast iron frame design incorporates integrally cast support and ribbed mounting feet, which assure a solid, dependable pump installation and operation. One frame fits all pump sizes. The frame has a back pull-out design feature, which allows for easy inspection or maintenance without disturbing the piping to the pump. Wiping vanes reduce axial loading and prevent dirt from entering the sealing area. Packing or various mechanical seal arrangements are available as standard options. The pump is offered in a variety of materials: cast iron, 316 stainless steel fitted, all 316 stainless steel, or CD4MCu.
Vertiflo Pump Company
Enterprise pipeline management solution
Yokogawa Electric Corporation’s Pipeline Management Solution (EPMS) R1.03, is the latest version of an enterprise level pipeline applications suite that was first released to the market in June 2015. The EPMS suite is the product of over 20 years of Yokogawa experience in implementing oil and gas pipeline management solutions across the globe. Developed for deployment at the heart of the pipeline operations management environment, the EPMS supplements a core SCADA platform with specific gas and liquid applications that enable a pipeline operator to manage delivery contracts and associated logistics in a safe, cost effective, and efficient manner. Functions handled by the EPMS suite include: gas/liquid nomination and metering; energy value calculation; batch and tank management (multi-product liquids); pipeline integrity monitoring; and compressor/pump energy monitoring.
Yokogawa Electric Corporation