Telog has the solution for monitoring overflow sites around the clock.
Overflow monitoring
Click here to enlarge image
Telog has the solution for monitoring overflow sites around the clock. The company's family of CSO/SSO monitoring products will give alarm notification in the event of a potential or occurring overflow event. Each event is recorded with time stamp, level and duration. Data can be downloaded manually without entering confined spaces. Wireless data transfer also is available using cellular or CDPD via Telog's proprietary "buried in the road" antenna. Downloaded data can be formatted with Telogers for Windows to satisfy reporting needs. Telog Instruments, Inc. Victor, NY Tel: 585-742-3000 Web: www.telog.com
Multi-hose pump
Click here to enlarge image
Seepex has introduced a new pump design. The new MAP, Multi-Hose Axial Flow Peristaltic Pump, combines the features of progressive cavity and peristaltic pump technologies. The patented design offers seal-less performance with fewer pulsations and longer hose life. The pump can transfer and meter up to six separate fluids simultaneously. Metering with less than one percent flow variation and a 100:1 turndown ratio is possible. The product range includes four models with performance options to 17 US gpm and 90 psig. seepex, Inc. Enon, OH Tel: 800-695-3659 Web: www.seepex.com
Tanks
Click here to enlarge image
Superior Tank Co. specializes in the fabrication, erection, dismantling and repairing of API and AWWA bolted and welded steel tanks for oil, water and bulk storage. In addition, the company provides site work preparation including grading, excavating, structural concrete, masonry, pipeline and asphalt paving for the foundation of its tanks. Superior Tank Co., Inc. Santa Fe Springs, CA Tel: 562-946-8804 Web: www.superiortank.com
Interactive communication system
Click here to enlarge image
RACO Manufacturing and Engineering Company announced the introduction of its Catalysttrademark Interactive Communications System, an HMI, wireless, remote, data logging and alarm notification system. It allows users to collect data from, monitor and adjust up to 256 off-site control points from a single location, to stay in touch while off site. The system features up to five megabytes of on-board memory, recording up to 740,000 data samples while monitoring alarms, channel site changes, indicators, meters, switches, and more. RACO Manufacturing and Engineering Co. Emeryville, CA Tel: 800-722-6999 Web: www.racoman.com
Open-channel flow
The American Sigma 980 Open-Channel Permanent Flow Meter uses three different level/flow sensing technologies and can also monitor pH, rainfall, and temperature. This provides the versatility required for a wide range of applications including surcharge flows or reversed flow conditions; weirs and flumes; and small-to-large channels. The meter features a flexible power supply and a large, easy-to-read graphics display. Data management includes logging of readings from three channels for 400 days. American Sigma Loveland, CO Tel: 800-635-4567 (request #3445) Web: www.americansigma.com
Dewatering/drying unit
Click here to enlarge image
The J-Vap system dewaters and dries product or waste streams in a simple, one-step operation. Advantages include low temperature drying, low energy consumption, and extremely low emissions. Any level of drying can be achieved by simply extending the drying time. The system is manufactured in sizes to accommodate almost any dewatering and drying need. Laboratory and on-site testing also are available. USFilter Dewatering Systems Holland, MI Tel: 800-245-3006 Web: www.usfilterdsg.com
RO performance monitor
Click here to enlarge image
The RO Performance Monitor from RODI Systems is a single instrument designed to monitor all of the necessary RO operating parameters including conductivity, pH (or ORP), temperature, flows, and pressures. The monitor calculates and logs all operating data including normalized permeate flow. It predicts when membrane cleaning is necessary and eliminates time-consuming data logging and normalization calculations. RODI Systems Corp. Aztec, NM Tel: 505-334-5865 Web: www.rodisystems.com
Vertical pump
Click here to enlarge image
Vertiflo Pump Company offers the Series 800 Industrial Vertical Immersion Sump Pump for service in water, corrosive chemicals and hazardous liquids. Applications include sump drainage, flood control and process drainage to meet EPA and OSHA requirements. Pumps are usually shipped in one-half to one-third the lead-time of other manufacturers. The Series 800 pumps are available in cast iron, 316 Stainless Steel or Alloy 20, for severe services with minimal maintenance at heads to 230 feet and temperatures to 350 Vertiflo Pump Company Cincinnati, OH Tel: 513-530-0888 Web: www.vertiflopump.com
PH/ORP sensors
Click here to enlarge image
GLI International is offering a new line of Differential Sensors for measuring pH and ORP in a wide range of applications. The pHDtrademark series uses the company's Differential Electrode Technology. Three measuring electrodes are used instead of the two contained in conventional pH sensors. The process and reference electrodes measure the pH differentially with respect to a third ground electrode. This technology is proven to provide accuracy, reduce reference junction fouling, and virtually eliminate ground loops, resulting in greater reliability with less downtime and maintenance. GLI International, Inc. Milwaukee, WI Tel: 800-454-0263 Web: www.gliint.com
Sewage pumps
Click here to enlarge image
Patterson's Type F and the ForcelineRegistered NCS Series non-clog sewage pumps are now offered with a sealing arrangement that requires no flush water. This new technology features EnviroSeal's SpiralTracRegistered throat bushing and Chesterton's Model 442trademark split mechanical seals to provide substantial savings in areas of maintenance and seal flush water. In addition, maintenance can now be performed to the seal and stuffing box without taking the pump out of service. Patterson Pump Company Toccoa, GA Tel: 706-886-2101 Web: www.pattersonpumps.com
Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.
Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.
Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....