New Products

Aug. 28, 2013
Fluoramics has introduced HinderRust™, a zero-VOC, surface-active rust inhibitor and industrial lubricant.
Lubricant, rust inhibitor

Fluoramics has introduced HinderRust™, a zero-VOC, surface-active rust inhibitor and industrial lubricant. The product has no solvents, won't wash away and is suited for confined spaces because of its non-aerosol application. Its low viscosity and surface activity allow it to soak into every nook and cranny of cable and steel structures. It is designed to stop rust and corrosion due to salt water and salt air. When used on wire cable or rope, it both lubricates and prevents rust. Fluoramics

Panel meter

The Ashcroft® Model DM61 digital panel meter does more than just display the analog or Modbus RTU digital signal from a sensing device with an output. Equipped with a variety of electronic features, this input-output device allows users to configure the display to read out in their required engineering unit, recall min. & max. readings and set hi-lo alarms. Standard features also include a six-digit display, password protection and an on-board DC transducer power supply. Also available are internal or external relays, a 4-20 mA output and expansion modules to enable conversion to USB, as well as other serial outputs. Ashcroft

Jet mixers

Jet mixers are used in wastewater treatment applications where liquid blending, solids suspension, flow generation or chemical reactions are key process parameters. Jet mixing is a very effective way to distribute mixing energy while minimizing power input in large diameter reactors. The in-tank components are FRP and/or stainless steel with no moving parts. Conventional pumps are used for the jet motive flow and are located just outside the tanks for ease in maintenance. Compared to alternative mixing technologies, a KLa jet mixing system offers: Proven 20+ Years Design Life, Low Installed Cost, Low Maintenance Cost, Superior Process Performance, and Superior Corrosion and Abrasion Resistance KLa Systems

Access interlock

Kirk Key's HD Series Type DM Access Interlock is designed to protect equipment and workers from costly errors during electrical and switchgear maintenance. The heavy-duty interlock ensures that steps cannot be skipped and that a safe, predetermined sequence of operation is followed. The HD Series is made entirely of electropolished 316 stainless steel and offers excellent performance standards in high temperature or corrosive environments. The interlock is applicable for hinged doors, manhole covers, sliding door hatches, or equipment that will not accommodate a precise-fitting door lock or require varying travel to latch. Kirk Key Interlock

Guided wave radar

Magnetrol International has launched the Eclipse Model 706 guided wave radar (GWR) transmitter, offering improved performance for a wide range of level and interface control applications. The transmitter's innovative GWR circuitry achieves both a higher transmit pulse amplitude and improved receiver sensitivity, resulting in a signal-to-noise ratio (SNR) nearly three times higher than competitive GWR devices. Magnetrol

High pressure valves

Vindum Engineering has released the patented high-pressure and high-precision CV Series Valves, capable of continuous operation at pressures up to 20,000 psi. On-Off or 3-Way/4-Position models are available. This patented valve design can also be used in high temperature applications and/or with corrosive fluids, further enhancing its operating envelope. This high-pressure model is pneumatically operated via a set of small, low-voltage pilot valves. The valves are available in a wide range of seal materials as well as corrosion resistant wetted parts (stainless steel or Hastelloy C-276), with either 1/8" or 1/4" fittings for high-pressure tubing. Vindum Engineering Inc.

Pipe lining systems

Tnemec's Series 431 Perma-Shield® PL is a high-performance, ceramic-modified epoxy lining for ductile iron and steel pipe. Formulated for the most aggressive sewer environments, it offers advanced permeation, abrasion and chemical resistance. It can withstand 2,500 psi hydrocleaning, and its light-green color makes it easy to inspect. Tnemec Co.

Gas detection system

The new Sierra Monitor Sentry IT Fire and Gas Detection System has the capability of simultaneous interface via RS-485 Modbus, analog 4-20, relay contact, and SentryBus, which insures that both new and legacy sensor modules can be deployed. Sentry Commander Logic insures that complex algorithms such as zone voting, delay timing, multiple unique alarm levels, and other special requirements can be implemented with simple user configuration at the spreadsheet level. Sierra Monitor

Modular frack tank

Ecosphere Technologies announced its newest product, the Ozonix® EF10M frack tank system. The EF10M features a "plug-and-play" Ozonix® water treatment system that can be used in conjunction with a custom 500 barrel frack tank and easily removed for installations that require an even smaller footprint. The tank is capable of processing 10 barrels per minute -- or more than 600,000 gallons of water per day. EF10M eliminates chemicals, waste byproducts and residual pollutants; eliminates separation, transportation and disposal costs; oxidizes contaminants; and requires minimal mobilization and demobilization. Ecosphere Technologies Inc.

Screen filter

More than a basket strainer, the heavy-duty Orival Model ORC Automatic Self-cleaning Screen Filter removes nuts, bolts, slag, stones, and other small objects from fluid pipelines. The rugged filter comes in sizes 4" to 24" for flow rates up to 12,000 gpm. Robust 316L stainless steel perforated screen elements typically have 3,000, 5,000 or 8,000 micron holes. This coarse filter is completely self-cleaning and automatically goes into a quick rinse cycle based on differential pressure or elapsed time. ORCs are available in carbon steel with an oven-cured polyester coating inside and outside, in stainless steel or fabricated materials to suit the application. Orival

High-current switchgear

Phoenix Electric Corporation offers custom-made, high-current switchgear that can be configured for indoor or outdoor use. These fixed-mount designs are custom designed to match existing equipment on-site to meet highly specialized or unusual needs or to take advantage of the latest technological advances. Phoenix offers project support from design through final commissioning. These products are in accordance with ANSI / IEEE / NEMA / NEC standards and are inspected under strict quality assurance guidelines fully consistent with ISO 9001 standards. Phoenix Electric

Silica analyzer

Hach's 5500sc Silica Analyzer is ideal for the power industry. It has a unique pressurized reagent delivery system that helps eliminate frequent maintenance associated with other analyzers using traditional pump systems. The Hach 5500sc can operate continuously for up to 90 days on only two liters of the needed reagents, which helps facilities reduce user interaction with longer replacement intervals. The new, simple reagent change process features color-coded caps that allow changeover with a simple twist of the cap. Predictive diagnostic tools help reduce unplanned downtime, alerting operators before there is an issue and walking through the steps to correct it. Hach

Hard hat brim

Ergodyne has announced the expansion of their heat stress solutions to include the Chill-Its® 6660 Hard Hat Brim with Shade. It fits around the outside of a hard hat, providing both sun and UV protection for the face and neck and is ideal for workers who are exposed to the sun and its harmful UV rays. The product is 100% Polyester fabric, has a universal design of elastic inner rim to fit most hard hats and is available in two colors: Hi-Vis Lime and Hi-Vis Orange.

Mixer, aerator motors

Aqua-Aerobic offers high-efficiency and premium-efficiency Endura® Series motor options for Aqua-Jet® surface aerators and AquaDDM® direct-drive mixers. The motors are available in a variety of horsepowers and operate under the most severe conditions. They require no greasing and only limited maintenance for five years. A three-year mechanical warranty is also included. The premium efficient NEMA 841 motors have efficiency 5-7% higher than standard efficient motors. Aqua-Aerobic

Turbine liquid meter

Turbines Inc. has developed its High Accuracy Meter for liquid applications where precise measurement is of paramount importance. Part of Turbine's premium line of high-accuracy turbine flow meters, the High Accuracy Meter is specifically engineered to meet the strict standards required for custody transfer. The High Accuracy Meter delivers ± 0.5% or better accuracy and ± 0.1% repeatability for low viscosity applications. Turbines

Centrifugal pumps

Subaru Centrifugal Pumps combine a powerful overhead cam engine, heavy-duty construction and reliable performance for a variety of applications. An abrasion-resistant, cast-iron, three-blade impeller ensures long life, while a hardened cast-iron volute effectively withstands debris sucked through the strainer. The self-priming pumps are available in 2-, 3- and 4-inch models. Each is powered by a Subaru EX Series overhead cam engine, providing maximum performance, lower emissions and better fuel economy. The 2-inch PKX201 is powered by the EX13 -- a 4.5-horsepower engine -- and offers a delivery volume of 158 gallons per minute. Subaru Industrial Power

Skid pump system

Sodimate's mounted slurry system integrates a slurry tank, skid pumps and controls, and is pre-wired and ready-to-use, allowing for quick installation and start-up. Typical slurry tank fabrication material includes high-density polyethylene (HDPE), stainless steel or fiber glass, and volume can range from 130 gal to 500 gal. Completely dust-free, the skid pump system is specifically fabricated to be used with dry hydrated lime and powdered activated carbon (PAC). Sodimate

Gas monitor

The iTrans 2 fixed-point gas monitor from Oldham employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans 2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry-standard 4-20 mA analog line. The infrared sensor provides detection of explosive gases in more severe environmental conditions where the presence of poisons could harm the use of a catalytic cell. The iTrans 2 also can be configured with a 0-100% volume methane infrared sensor for biogas applications and CO2 infrared sensors ranging from 0.5% volume to 100% volume. Oldham

Ductile iron pipe

The new NXT DDP product line from U.S. Pipe provides better joint deflection, pumping costs and corrosion protection when compared to previous water transmission systems. Allowing joint deflection up to seven degrees, the NXT gasket is available in both restrained and non-restrained versions. The unique design allows lower insertion forces than previous "push-on" gasket designs. Taking advantage of recent developments in casting technology, the NXT DDP system allows the pipe wall to be thinner than previously available, which reduces weight and increases the inside diameter, allowing greater flow and reduced pumping cost. Corrosion protection is provided by various combinations of standard and advanced coatings. US Pipe and Foundry

Check valve

Val-Matic's AWWA Swing Check Valve is designed for industrial water and wastewater applications and incorporates features that provide energy savings, ease of maintenance and extended valve life. Swing check valves are used to prevent backflow by automatically closing when fluid reverses direction. These valves feature a ductile iron disc that swings open upon pump startup to provide a 100% unrestricted, full-flow area and energy savings. When closed, the valve offers a tight shut-off, through-the-field, replaceable stainless steel seat that is raised from the body to assure sealing in applications with high solids. This resilient seat incorporates integral O-ring sealing surfaces for drop-tight sealing at both high and low pressures. Val-Matic Valve & Manufacturing

Narrow transducer

Phoenix Contact's MINI Analog family now includes a transducer designed for frequency voltage signals. Common types of inputs include dry relay contacts, NAMUR sensors, and NPN and PNP signals. The MINI Analog family has a thin 6.2 mm housing and T-bus power bus capabilities that save space and drastically reduce installation time. Optional quick cabling solutions are also available to interface the MINI Analog modules to controllers, greatly reducing installation time. The transducer features an easy dip-switch programmable setup and a wide power circuit range of 9.6 to 30 V DC. In addition, a low transmission error of 0.1% means high-level accuracy for the customer. Phoenix

Solar-powered thermometer

Palmer Instruments announces the addition of a new solar powered digital industrial thermometer. Ideal for those who prefer the readability of a digital thermometer, the Palmer Solar Digital Industrial has a 1/2" high LCD screen. Models are available in designs used to replace Bimetal-type thermometers and traditional-type industrial thermometers with a tapered bulb and 1 1/4-18 swivel nut fitting, as well as for Air Duct temperature measurement. It is also completely mercury-free for safe installation in a variety of environments. Models with 4-20 mA transmitter capability for connection to a remotely-installed controller or recorder are also available. Palmer Wahl Instrumentation

More Industrial WaterWorld Articles
Past IWW Issues

Sponsored Recommendations

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.

A digital circuit breaker built for the future

EvoPacT medium voltage digital vacuum circuit breaker

The New Generation of Intelligent MV Switchgear

Step into the future of electrical infrastructure with Intelligent MV Switchgear - where traditional equipment becomes smart, providing real-time data on critical components like...

Switchgear goes digital with SureSeT

Discover what you can do with Square D natively digital MV metal-clad switchgear.