Grain Processing Corporation in Iowa to pay civil penalty for Clean Water Act violations

April 18, 2013

LENEXA, Kan. — GPC failed to comply with its National Pollutant Discharge Elimination System (NPDES) monitoring requirements.

LENEXA, Kan. — EPA Region 7 announced that Grain Processing Corporation (GPC) in Muscatine, Iowa has agreed to pay a civil penalty for violations of the federal Clean Water Act (CWA) that occurred in 2011, according to a press release.

GPC failed to comply with its National Pollutant Discharge Elimination System (NPDES) monitoring requirements by taking unrepresentative flow measurements and not conducting settleability tests; failed to maintain all facilities and control systems in good working order; and exceeded the effluent limitations for biochemical oxygen demand, total suspended solids, temperature and pH, stated the release.

GPC came into compliance with CWA regulations after EPA Region 7 issued an order to the company on July 29, 2011, requiring it to correct the violations, noted the release.

“Discharge permits are one of the Clean Water Act’s most important tools to protect our waters’ health and productivity,” said EPA Region 7 Administrator Karl Brooks. “EPA takes NPDES violations very seriously and this penalty sends a message to GPC and others that protecting our waters is an important part of their operations.”

Read the entire press release here.

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....