EPA, Fort Lincoln Retail reach settlement for CWA violations in DC sewer system

Oct. 15, 2015
The Environmental Protection Agency and Fort Lincoln Retail, LLC have officially reached a settlement over alleged violations of Clean Water Act regulations designed to protect America's waterways from polluted stormwater runoff.

PHILADELPHIA, PA, Oct. 15, 2015 -- The Environmental Protection Agency (EPA) and Fort Lincoln Retail, LLC have officially reached a settlement over alleged violations of Clean Water Act (CWA) regulations designed to protect America's waterways from polluted stormwater runoff.

Under an administrative consent agreement, the company will pay a $99,000 penalty to resolve violations involving stormwater runoff that flowed into the District of Columbia's storm sewer system and ultimately into the Anacostia River from the construction site of the Shops at Dakota Crossing at 3301 Fort Lincoln Drive, in Northeast Washington, DC.

EPA cited the company for failing to maintain erosion and sedimentation controls, protect storm drain inlets, and conduct and document required inspections.

Uncontrolled stormwater runoff from construction sites often contains sediment, oil and grease, chemicals, and other pollutants. The CWA requires owners or operators of construction sites to obtain permit coverage before commencing construction. These permits include pollution-reducing "best management practices," such as material storage and coverage requirements, runoff reduction measures, and employee training.

As part of the settlement, the company did not admit liability for the alleged violations, but has stated that it is now in compliance with applicable CWA requirements.

See also:

"EPA finalizes rule to modernize CWA reporting for utilities, municipalities"

"EPA proposes new rules to improve waste management, protect waterways"

###

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....