USGS reinstates measuring of water used for electric energy production

Nov. 25, 2013
After nearly two decades, water amounts consumed in thermoelectric power production will be reported due to a USGS reinstatement report.

Nov. 25, 2013 -- After nearly two decades, the amount of water consumed in the production of thermoelectric power will be reported again as a result of a reinstatement report by the U.S. Geological Survey (USGS).

The report, titled "Methods for Estimating Water Consumption for Thermoelectric Power Plants in the United States,"indicates that tracking consumptive use of this water could allow water resource managers to evaluate the influence it has on the overall water budget of a watershed. As such, the use of heat and water budgets to estimate water consumption at individual thermoelectric plants provides a useful check on other estimation approaches and in many cases may be the most accurate method available.

Thermoelectric water withdrawal refers to water removed from groundwater or surface water for use in a thermoelectric power plant, mainly for cooling purposes. Much of the water currently withdrawn for cooling is reintroduced into the environment and immediately available for reuse. Accordingly, the consumptive use occurs when some of the water is evaporated during the cooling process or incorporated into byproducts as a result of the production of electricity from heat. Once the water is consumed, it is no longer able to be reintroduced into the environment.

This study presents a method for collecting location and cooling-equipment data. An upcoming study will be released providing the consumption numbers derived from the Survey's heat/water budget models. About half of the water withdrawals in the United States are for thermoelectric cooling water; however, most of the water is returned to the environment after use. Further, the methods for estimating evaporation presented in this study will play a key role in the National Water Census, a USGS research program on national water availability and use that develops new water accounting tools and assesses water availability at the regional and national scales.

The USGS classifies water withdrawals for thermoelectric cooling by the two types of cooling systems used at the plants: recirculating systems and once-through systems. A recirculating cooling system circulates water through the generating plant condensers and is then cooled in a structure such as a cooling tower or cooling pond, before it is re-used in the same process. A once-through cooling system withdraws water from a surface-water source to circulate through the generating plant condensers and then discharges the water back to surface water at a higher temperature.


Sponsored Recommendations

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.

A digital circuit breaker built for the future

EvoPacT medium voltage digital vacuum circuit breaker

The New Generation of Intelligent MV Switchgear

Step into the future of electrical infrastructure with Intelligent MV Switchgear - where traditional equipment becomes smart, providing real-time data on critical components like...

Switchgear goes digital with SureSeT

Discover what you can do with Square D natively digital MV metal-clad switchgear.