Adsorbent ion exchange products help remove radiation from Fukushima wastewater

Dec. 9, 2011
Adsorbent ion exchange products are successfully being used by Toshiba Corporation and Shaw Global Services LLC for the cleanup of radiation-contaminated water at the Fukushima Daiichi nuclear power plant in Japan...

DES PLAINES, IL, Dec. 8, 2011 -- Adsorbent ion exchange products from UOP LLC, a Honeywell (NYSE: HON) company, are successfully being used by Toshiba Corporation and Shaw Global Services LLC for the cleanup of radiation-contaminated water at the Fukushima Daiichi nuclear power plant in Japan.

The Simplified Active Water Retrieve and Recovery System (SARRY) is utilizing UOP IONSIV™ Ion Exchangers to remove and reduce radioactive materials in the contaminated wastewater. The wastewater at Fukushima Daiichi was contaminated after the earthquake and tsunami in Japan earlier this year.

"Our thoughts are with those who have been affected by this disaster. Honeywell's UOP is proud that our advanced ion exchange products are successfully supporting the efforts to treat the contaminated water and helping to prevent further damage at the Fukushima plant and surrounding areas," said Mike Millard, vice president and general manager of Catalysts, Adsorbents and Specialties for Honeywell's UOP.

The SARRY system, developed by Toshiba, Shaw and AVANTech Inc., has been in operation for over three months and continues to reduce radioactive cesium to non-detectable levels.

UOP IONSIV Ion Exchanger adsorbents are crystalline materials that have the ability to selectivity remove radioactive ions from liquids. These materials have been used commercially for more than 30 years to remove radioactive ions from liquids such as radioactive waste streams in commercial nuclear power plants, alkaline tank waste and spent fuel storage pool water.

Honeywell's UOP pioneered the adsorbents industry more than 60 years ago with the invention of the first synthetic zeolites for use as molecular sieve adsorbents. Today, in addition to a wide range of molecular sieve and activated alumina products, it offers a broad portfolio of adsorbents for the removal of contaminants such as mercury and sulfur compounds.

###

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....