EPA requires stormwater handling improvements at Cabras Marine

July 5, 2018
Corporation to reduce discharges of oil, metals and other contaminants into Apra Harbor, Guam.

HONOLULU, JULY 5, 2018 -- The U.S. Environmental Protection Agency (EPA) has reached an agreement with Cabras Marine Corp. to reduce discharges of oil, metals and other contaminants into Apra Harbor, Guam.

'All facilities must control pollutants and keep them from damaging surrounding ecosystems and communities,' said EPA Pacific Southwest Regional Administrator Mike Stoker. 'This settlement will help protect and preserve water quality and coastal resources in Apra Harbor.'

In March 2017, EPA conducted an inspection of the Cabras Marine facility and found multiple violations of the Clean Water Act. Those violations included discharge of industrial stormwater without a permit, failure to properly maintain containment berms, failure to control sandblast grit and paint particles, improper storage of used oil, and inadequate controls for leaking oil.

Cabras Marine's operations include boat, chassis and engine repair, fabrication, sandblasting, and material storage and disposal.

Under the administrative order on consent with EPA, Cabras Marine will:

  • Obtain required authorization for industrial stormwater discharges;
  • Improve controls for pollutants including sandblast grit, paint particles, paint aerosols and oily waste;
  • Install a media filtration unit to treat industrial stormwater prior to discharge into Apra Harbor; and
  • Build a permanent facility for the storage of used oil.

Cabras Marine will file a final report with EPA documenting completion of the work required under the settlement.

For more information, visit: https://www.epa.gov/pi/cabras-marine-corporation-piti-gu-administrative-order-consent

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....