New contaminant monitoring rule requires water systems to look for 28 more chemicals

Oct. 24, 2012

WASHINGTON — The EPA sets drinking water standards to control contaminants in the public drinking water supply.

WASHINGTON — Since the establishment of the federal Safe Drinking Water Act (SDWA) more than 35 years ago, the safety of the U.S. drinking water supply has been an ongoing priority for health officials. Operating under the authority of the SDWA, the Environmental Protection Agency (EPA) sets drinking water standards to control contaminants in the public drinking water supply. To date, the EPA has identified nearly 90 separate contaminants whose concentrations in drinking water are regulated under its National Primary Drinking Water Regulations.

The fact that contaminants are detected in trace amounts in drinking water does not alone imply risk to humans. Significant research is needed to understand both the scope of the problem and its implications for the public drinking water supply. To determine whether a contaminant should be regulated, the EPA analyzes peer reviewed science addressing a number of variables, including the occurrence levels of a contaminant in the environment, routes of human exposure and the potential health effects of exposure.

[Related content: Report states EPA taking steps to improve SDWA compliance]

The EPA also collects data under its Unregulated Contaminant Monitoring program on contaminants that are suspected to be present in drinking water but that are not currently regulated. In support of that data collection effort, the EPA has recently implemented its third Unregulated Contaminant Monitoring Rule (UCMR 3), which will require public water systems (PWSs) to conduct assessment monitoring for the presence of 28 additional chemicals and two viruses during a 12-month period beginning in January 2013. The EPA will use the data from this and prior UCMR assessment phases to determine whether further drinking water regulations are in the interest of public health.

[Related content: UL Announces Water Testing Services to Meet UCMR 3 Requirements]

This UL white paper provides a detailed overview of the EPA’s UCMR 3 monitoring program for PWSs. Beginning with background information on the EPA’s role in the regulation of drinking water contaminants, the paper then offers specific details on the UCMR 3 monitoring program requirements, including the specific substances subject to monitoring, sampling and testing methods, and important program schedules and deadlines. The white paper concludes with considerations for PWSs regarding compliance with UCMR 3 monitoring requirements and recommendations on the selection of a testing laboratory to conduct UCMR sample testing.

Read the entire white paper here.

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.