Construction company to implement oil spill prevention plans to protect waterways

May 6, 2013

HURT, Va. — Under the Clean Water Act, owners of facilities that store 1,320 gallons of oil or more must develop and implement a SPCC plan.

HURT, Va. — The Environmental Protection Agency (EPA) announced that English Construction Company has agreed to prepare and implement oil spill prevention plans and pay a $17,289 penalty to settle alleged violations of federal oil spill prevention regulations at its construction facility at 113 Main Street in Hurt, Va., according to a press release.

Under the Clean Water Act, owners of facilities that store 1,320 gallons of oil or more must develop and implement a spill prevention, control and countermeasure (SPCC) plan.

SPCC plans are required to prevent discharges of oil from onshore facilities into navigable waterways, and for containing oil in the event a discharge occurs, noted the release.

During a compliance inspection at the Hurt facility, EPA inspectors found that the company failed to prepare an SPCC plan.

In addition, EPA alleged that English Construction failed to conduct required testing and visual inspections of oil storage containers, failed to put in place facility drainage safeguards, or to adequately train personnel to operate and maintain equipment for preventing oil spills, stated the release.

An accidental oil spill into sewers and waterways can pose threats to people’s health and the environment. English Construction’s SPCC plans will prevent potential oil spills into nearby Roanoke River.

Read the entire press release here.

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....