Company to implement additional groundwater measures at Superfund site

May 17, 2013

FILLMORE, Calif. — Texaco installed an extraction and treatment system to remove benzene and toluene from the groundwater.

FILLMORE, Calif. — The Environmental Protection Agency (EPA) announced that work will begin this week to address soil contamination at the Pacific Pipeline Superfund Site located in Fillmore, Calif., according to a press release.

Additional groundwater work will begin in early 2014. This work, estimated to cost more than $8 million, is part of a recent settlement with Texaco Inc., a Chevron subsidiary, noted the release.

Texaco, under EPA’s supervision, will excavate 20,000 cubic yards of soil contaminated with lead and polycyclic aromatic hydrocarbons (PAHs) as well as implement additional groundwater measures at the site.

Once the soil work is completed, the main part of the site will be ready for commercial development and recreational use.

In 1992, EPA selected a cleanup plan to address groundwater contamination at the site. Texaco installed an extraction and treatment system to remove benzene and toluene from the groundwater.

Although the levels of these chemicals were significantly reduced, they remained above federal and state drinking water standards. EPA amended the plan in 2011, calling for additional actions.

Read the entire press release here.

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....