Leak in sewer line spills about 10,000 gallons of untreated wastewater into creek

Sept. 10, 2013

JACKSONVILLE, N.C. — The leak started in the sewer line before moving into the stormwater lines, which discharged the water into the creek.

JACKSONVILLE, N.C. — A leak in a sewer line led to the discharge of about 10,000 gallons of untreated wastewater into Mill Creek, according to The Daily News.

The leak started in the sewer line before moving into the stormwater lines, which discharged the water into the creek.

Emergency work is being done to try and repair the leaks as roads are being blocked off, noted the article.

The state has been notified of the unintentional discharge and the city of Jacksonville, N.C. is following guidance from the state on what steps should be taken, stated the article.

The city will be monitoring and testing the area where the discharge occurred to check the water quality.

Read the entire article here.

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....