Products & Services: Disinfection Technologies

Nov. 1, 2015
Collection of disinfection technologies products and services.

Evoqua’s Millennium III™ series NSF-certified generators combine high performance with safety, durability, simplicity of use, and easy maintenance. The generators produce a chlorine dioxide solution in a one- or two-stage process under vacuum conditions to generate chlorine dioxide safely and efficiently. Millennium III generators are capable of consistently producing chlorine dioxide with a yield efficiency of 95 percent. Further, they are designed, built and certified in compliance with NSF 61, Section 8 standards.

Evoqua Water Technologies

UV disinfection

The Neptune Benson ETS-SX range of products offer high-performance, inline, medium-pressure UV disinfection reactors designed for applications with larger flows and specifically drinking water quality. The compact system has been designed for the simplest installation into any pipe work system. Most models have been validated per rigorous industry-specific application standards. Features include: quality materials, flexibility of installation, optimum efficiency, a low-voltage automated wiper, and a micro-processing system for basic control.

Neptune Benson

Bleach treatment

Olin Chlor Alkali Products is a supplier of chlorine and sodium hypochlorite (bleach) for drinking water and wastewater disinfection. Olin can make delivered bleach reliable and cost-effective. Further, using trucks and hundreds of rail cars, the company can deliver bleach coast-to-coast from a number of plants in the U.S. and Canada.

Olin Chlor Alkali Products

Gas chlorinator

The all-vacuum REGAL™ system makes gas chlorination very safe. Made in the U.S., the REGAL Gas Chlorinator is used to disinfect drinking water, wastewater and industrial process water. Further, it uses 100% gas chlorine and lowers energy and chemical costs. Used worldwide for municipal water and wastewater treatment, REGAL products have a wide range of industrial, commercial and agricultural applications and allow the use of chlorine gas, which is the most economical method of disinfection, without sacrificing safety or reliability.

Chlorinators Incorporated

Dechlorination solutions

Integra Chemical’s technical support staff can provide assistance in addressing specific dechlorination requirements. Dechlorination may be as simple as placing tablets in a flow stream or delivering a mixed solution through a metering pump or day tank. Integra Chemical’s Vita-D-Chlor provides safe and effective dechlorination. Further, it will neutralize chlorine and chloramines instantly and is 100% organic and water soluble.

Vita-D-Chlor/Integra Chemical Company

Electric mixers

GridBee GS submersible electric mixers from Medora Corporation, for tanks from 1 MG to 20 MG, help municipalities affordably meet potable water quality standards and prevent ice damage. Starting at $6,000, GridBee mixers provide thorough mixing, uniform water age and disinfectant distribution while eliminating stagnation and short-circuiting. The mixers install through a 12-inch hatch with no need to enter or drain the tank.

Gridbee, a Medora corporation

Mass flow meter

The Model ST100L Air/Gas In-Line Thermal Mass Flow Meter with a Vortab® Flow Conditioner from Fluid Components International provides accurate flow measurement without the long, straight pipe runs. The ST100L is typically installed in a water disinfection system’s chlorine gas inlet line to the chlorinator panel. For operation in corrosive chlorine gas environments, this meter’s wetted material, including sensor element, inline flow body, flow conditioner, and process connections, are all fabricated of Hastelloy C-276 to ensure corrosion protection and long life.

Fluid Components International LLC

Disinfection solutions

Aquionics has over 300 municipal wastewater installations in North America treating a wide variety of applications such as: lagoons, oxidation ditches, trickling filters, SBRs, disk filters, and MBRs. A specialist in closed-vessel, medium-pressure technologies for wastewater applications for the last 15 years with the InLine+W™ ultraviolet product, Aquionics offers customers confidence and reassurance. Likewise, the company offers a complete product range including an open-channel OpenLine™ and closed-vessel, low-pressure unit for wastewater applications.


More WaterWorld Current Issue Articles
More WaterWorld Archives Issue Articles

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....