Thermal mass flow meter

July 6, 2015

The Model ST100L Air/Gas In-Line Thermal Mass Flow Meter with Vortab® Flow Conditioner from Fluid Components International provides accurate flow measurement without the long straight pipe runs required by other meters. The ST100L is typically installed in a water disinfection system's chlorine gas inlet line to the chlorinator panel. For operation in corrosive chlorine gas environments, its wetted material, including sensor element, inline flow body, flow conditioner, and process connections, are all fabricated of Hastelloy C-276.

Fluid Components International LLC
www.fluidcomponents.com

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....