Check valve

July 2, 2013
Val-Matic's Tilted Disc® Check Valve provides quick closure, drop tight seating and reduction in water hammer with its 40° disc stroke and 20° seating angle.

Val-Matic's Tilted Disc® Check Valve provides quick closure, drop tight seating and reduction in water hammer with its 40° disc stroke and 20° seating angle. It uses energy efficient operation, streamlined body contouring and a flow area 40% greater than nominal pipe size. Top- or bottom-mounted oil dashpots can be added for systems with extreme conditions such as high shut-off heads, surge tanks or multiple pump applications. It's offered in 125B, 150B and 250B AWWA Classes in sizes 4"-60" for pressure ranges up to 400 PSI, and is also NSF/ASNI 61 certified for drinking water and NSF/ANSI 372 Certified Lead-Free.

Val-Matic Valve & Manufacturing Corp.
www.valmatic.com

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....

Meet the future of MV switchgear

SureSeT new-generation metal-clad. Smarter. Smaller. Stronger.