PA fracking water consists of contaminants, radioactive materials, finds study

Oct. 2, 2013
Treated liquid wastes from fracking released into local PA streams still contained high levels of salts and other contaminants, finds study.

Oct. 2, 2013 -- According to a new study, treated liquid wastes from hydraulic fracturing released into local streams in the state of Pennsylvania still contained elevated levels of salts and other contaminants, potentially threatening aquatic life and human health.

The study also reports high levels of radioactive materials in stream sediments at the disposal site. Published in the ACS journal Environmental Science & Technology, it states that the scientists recommend the use of advanced treatment technologies to further remove the potentially harmful material.

Avner Vengosh, Nathaniel R. Warner and colleagues explain that although fracking technology has fueled a boom in U.S. oil and gas production, disposal of its wastewater remains a major challenge. It is 2 to 5 times as salty as seawater and contains substances that could harm the environment and humans. One of the options some oil and gas companies have is to send the waste to a site where it is treated and then released into local streams where it is diluted. The Duke team investigated how such a disposal practice would affect the environment.

The scientists tested the discharge and stream water samples both upstream and downstream from a wastewater disposal site in western Pennsylvania. They found that the treatment removed some of the potentially harmful contaminants from wastewater -- more than 90 percent of barium and radium, for instance. However, chloride and bromide levels were still high. In addition, they found that radium levels in stream sediments where the wastewater was discharged were still about "200 times greater than upstream and background sediments and above radioactive waste disposal threshold regulations, posing potential environmental risks of radium bioaccumulation in localized areas of shale gas wastewater disposal," the researchers state.

###

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....