Hydraulic fracturing regulations in Louisiana meet objectives, says independent review

March 14, 2011
BATON ROUGE, LA, Mar. 14, 2011 -- An independent review of the Louisiana program regulating the hydraulic fracturing of oil and gas wells has concluded that the program is, over all, well-managed...

• Independent review completed of Louisiana Department of Natural Resources Office of Conservation program regulating hydraulic fracturing of oil & gas wells

BATON ROUGE, LA, Mar. 14, 2011 -- A targeted review of the Louisiana program regulating the hydraulic fracturing of oil and gas wells has been completed by a multi-stakeholder group, which has concluded that the program is, over all, well-managed and also made recommendations for improvements in the program.

The review was conducted by a six-person team appointed by STRONGER Inc., a non-profit organization that conducts voluntary state reviews of oil and natural gas environmental regulations. The review team, appointed in October 2010, consisted of three members and three observers representing environmental groups, state regulators and the oil and gas industry. Thirteen additional people attended the review.

"The review team has concluded that the Louisiana hydraulic fracturing program is, over all, well-managed, professional and meeting its program objectives," said Lori Wrotenbery, Director of the Oil and Gas Conservation Division of the Oklahoma Corporation Commission, who served as chairman of the review team. "We believe several aspects of the Office of Conservation and its operations merit special recognition."

The Louisiana hydraulic fracturing regulatory program was singled out for its operations in the areas of prompt review of policies and adjustment of regulations in response to Haynesville Shale development, water resource use monitoring and reporting, actions to increase recycling opportunities, and public education and outreach.

The review team has also made recommendations for improvements to the Office of Conservation hydraulic fracturing program concerning the review of casing and cementing standards, including surface casing requirements; immediate reporting of problems and subsequent reporting of volumes, pressures and materials used; structured training for field inspectors; and spill prevention and control plans.

The review team members, in addition to Lori Wrotenbery, were Bruce Baizel, Earthworks Oil and Gas Accountability Project, and Jim Collins, a petroleum engineer representing the Independent Petroleum Association of America. Gil Bujano, Texas Railroad Commission; Doug Daigle, a Conservation Consultant from Baton Rouge; and Richard Metcalf, Louisiana Mid-Continent Oil and Gas Association participated as observers.

Copies of the Louisiana Hydraulic Fracturing Review are available by contacting Michael Nickolaus by email at [email protected], by phone at (405) 516-4972, or downloading from the STRONGER website at www.strongerinc.org.

About STRONGER
The name, STRONGER, is an acronym for State Review of Oil and Natural Gas Environmental Regulations. STRONGER was formed in 1999 to reinvigorate and carry forward the state review process begun cooperatively in 1988 by the U.S. Environmental Protection Agency (EPA) and the Interstate Oil and Gas Compact Commission (IOGCC).

The mission of STRONGER is to educate and provide services for the continuous improvement of regulatory programs and industry practices in order to enhance human health and the environment. STRONGER is a non-profit, multi-stakeholder organization which shares innovative techniques and environmental protection strategies and identifies opportunities for program improvement. The state review process is a non-regulatory program and relies on states to volunteer for reviews.

###

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....