The Q-PRESS® from Huber is a screw press with a conical screw shaft and cylindrical sieves consisting of three treatment zones: inlet and drive zone, three-part thickening and dewatering zone, and press zone with pneumatic counter-pressure cone.
The Q-PRESS® from Huber is a screw press with a conical screw shaft and cylindrical sieves consisting of three treatment zones: inlet and drive zone, three-part thickening and dewatering zone, and press zone with pneumatic counter-pressure cone. The supernatant is quickly removed by the feed pump via a large free filter surface at a low primary pressure while the volume of material between the screw flights is reduced by the conical screw and the sludge is dewatered. Residual water is pressed out of the sludge by the pneumatic counterpressure cone at the press discharge.
Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.
Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.
Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....
