EPA postpones Steam Electric Power Plant Effluent Guidelines Rule

May 31, 2017
Agency proposes to postpone the compliance dates for the more stringent best available technology economically achievable requirements in the 2015 rule for several waste streams.

WASHINGTON, MAY 31, 2017 -- U.S. Environmental Protection Agency Administrator Scott Pruitt recently signed a proposed rule to postpone compliance dates for the effluent limitations guidelines and standards for steam electric power plants (ELG Rule), which was published in November 2015.

"This proposed rule is one of nearly two dozen significant regulatory reform actions I have taken during my short time as EPA Administrator to protect the environment, jobs and affordable, reliable energy. Today's action, if finalized, will provide relief from the deadlines under the existing ELG Rule while we carefully consider the next steps for this regulation," said Administrator Pruitt.

Specifically, EPA proposes to postpone the compliance dates for the more stringent best available technology economically achievable ("BAT") requirements in the 2015 rule for each of the following waste streams: fly ash transport water, bottom ash transport water, flue gas desulfurization ("FGD") wastewater, flue gas mercury control wastewater, and gasification wastewater.

Last month EPA determined that two administrative petitions asking the agency to reconsider the 2015 ELG Rule raised issues sufficient to warrant reconsideration of the rule.

EPA is requesting a 30-day comment period that will begin upon publication in the Federal Register at: www.regulations.gov and searching for EPA-HQ-OW-2009-0819.

RELATED ARTICLES
Water associations challenge EPA steam power plant rule
Space-Efficient Treatment System Polishes Beverage Waste Streams to Strict Effluent Levels
Zero Liquid Discharge Strategies For Compliance with Proposed Effluent Guidelines for FGD Wastewater

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....