Archer Daniels settles CWA violations at five large oil storage plants across U.S.

July 30, 2014
Archer Daniels Midland Company has agreed to settle allegations of Clean Water Act violations at five different large oil storage facilities across the United States.  


LENEXA, KS, July 30, 2014 -- Archer Daniels Midland Company (ADM), a major food processing and commodities trading company headquartered in Decatur, Ill., has agreed to settle allegations of Clean Water Act (CWA) violations at five different large oil storage facilities in the cities of Cedar Rapids, Iowa; Columbus, Neb.; Des Moines, Iowa; Mexico, Mo.; and Deerfield, Mo. Through the settlement with EPA Region 7, the company will also pay a civil penalty of $430,000 to the United States.

The CWA requires facilities that store large quantities of oil to develop response plans that outline procedures for addressing "worst-case" discharges of oil. By being prepared and by conducting required response drills, facilities are better situated to prevent environmental harm from such releases. Each of the five ADM facilities produces and stores more than 1 million gallons of oil. Combined, the five facilities have a total estimated storage capacity of more than 36 million gallons.

EPA identified the lack of a response plan during a Spill Prevention, Control and Countermeasures (SPCC) inspection in 2008 at ADM's Cedar Rapids, Iowa, facility. The plant required a Facility Response Plan (FRP) because the storage capacity of its denatured ethanol tanks exceeded one million gallons. ADM committed to develop and submit an FRP but failed to do so for the Cedar Rapids facility and three additional facilities until almost two years later in 2010. ADM's Deerfield, Mo., facility also operated for a period in 2011 and 2012 without a required updated FRP.

The settlement resolves these violations by ADM of the FRP requirements of the CWA. It also resolves violations of the industrial stormwater requirements of three CWA operating permits issued to ADM for the Cedar Rapids, Columbus and Deerfield facilities. The violations included ADM's failure to implement best management practices (BMPs) at its facilities, failure to conduct and record site inspections, exceedances of permitted effluent limits, and unauthorized discharges of non-stormwater to U.S. waters in violation of the facilities' CWA permits.

In addition to the payment of the $430,000 penalty, in order to document future compliance with the CWA, the settlement requires that ADM report on the implementation of the FRP program and the applicable industrial stormwater permits at the referenced facilities for three years.

See also:

"Historic CWA settlement to prevent millions of gallons of sewage discharges into SF Bay"

"WA firms settle CWA violations with EPA as part of Puget Sound initiative"

###

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....