Product Showcase

Feb. 1, 2018
Collection of new products of special interest to the industrial water and wastewater markets.

Pumps in new sizes

EnviroGear® Pumps, part of PSG®, a Dover company, is extending its line of E Series internal gear pumps with the availability of 4” (100 mm) and 6” (150 mm) sizes offering flows up to 500 gpm (1,893 L/min). Suitable for challenging and demanding transfer applications, these new E Series pumps are available in cast iron, carbon steel and stainless-steel materials. The pumps feature a revolutionary seal-less design with a patented between-the-bearing support system that effectively eliminates leaks and reduces mechanical wear, helping increase the safety for site personnel and the environment.

EnviroGear Pumps

www.envirogearpump.com

Smart, portable pH meter

The Pro2Go™ portable pH meter provides rapid measurement, one-handed operation and great durability. For increased operating confidence, it also lets the operator know when the attached sensor will need to be calibrated or replaced. The rugged, water-resistant meter is compatible with both analog and METTLER TOLEDO’s digital Intelligent Sensor Management (ISM™) pH/redox probes. ISM’s features include Plug-and-Measure operation for error-free setup.

Mettler Toledo

www.mt.com/Pro2Go

Remote position indication for manual valves

The Rotork SPI Smart Position Indicator provides a more reliable and accurate open/close position indication solution for multi-turn valves than previously available equipment. Limit switches or sensors for remote indication are located and terminated internally so no external junction box is required to connect to a Distributed Control System. Position is mechanically displayed locally via a large display dial. The maintenance-free unit is housed in an anodized aluminum enclosure that is environmentally sealed to IP 67. It is available in variants designed for service in either hazardous or non-hazardous areas.

Rotork

www.rotork.com

Saudi Aramco-approved fluorometer

Following detailed scientific and technical evaluation by the Environmental Protection Department of Saudi Arabia’s state-owned oil company Saudi Aramco, the Ballast-Check™ 2 Handheld PAM Fluorometer (USA) from Turner Designs is approved as a valid Ballast Water Sampling Instrument. Saudi Aramco announced in August 2017 that all ships calling at its ports and terminals are required to provide ballast water test results to show compliance with the IMO BWM 2004 convention. Ballast-Check 2 is a small, lightweight, highly durable handheld fluorometer ideal for quick indicative compliance checks of ballast water. Factory set, Ballast-Check 2 is ready for use right out of the box, no calibration necessary.

Turner Designs

www.turnerdesigns.com

Ball valves

Val-Matic Ball Valves are available in a wide range of sizes and pressure classes. EnerG® AWWA Resilient Seated Ball Valves and QuadroSphere® Trunnion Mounted Ball Valves are designed to provide both on-off and process control functions in municipal and industrial systems. Built using advanced manufacturing technologies and certified to rigorous AWWA, ASME and API industry standards, the valves assure reliable performance in numerous applications and media including liquids, gases and slurries. The valve seating systems are built with corrosion- and wear-resistant materials and tested to provide positive seating.

Val-Matic

www.valmatic.com

Broad spectrum biocide

Preventol DP 1021 from Lanxess is a broad-spectrum biocide developed for use in industrial water systems to control and prevent biofilm formation. In addition to microbial control, this new blend helps to reduce the buildup of organic load on the surface of the water treatment systems, thereby minimizing the formation of biofilms. Preventol DP 1021 is effective against aerobic and anaerobic bacteria, including sulfate-reducing and acid-producing bacteria. It performs at low dosage levels (<100 ppm), is non-corrosive for common materials and chemistries used in water treatment, and is a non-sensitizing biocide.

Lanxess

www.lanxess.com

Sponsored Recommendations

NFPA 70B a Step-by-Step Guide to Compliance

NFPA 70B: A Step-by-Step Guide to Compliance

How digital twins drive more environmentally conscious medium- and low-voltage equipment design

Medium- and low voltage equipment specifiers can adopt digital twin technology to adopt a circular economy approach for sustainable, low-carbon equipment design.

MV equipment sustainability depends on environmentally conscious design values

Medium- and low voltage equipment manufacturers can prepare for environmental regulations now by using innovative MV switchgear design that eliminates SF6 use.

Social Distancing from your electrical equipment?

Using digital tools and apps for nearby monitoring and control increases safety and reduces arc flash hazards since electrical equipment can be operated from a safer distance....